home *** CD-ROM | disk | FTP | other *** search
- Path: turtle.insider.sub.de!Klaus_Burkert%2:2437_901.88
- From: Klaus_Burkert%2:2437_901.88@GH_UUCP.INSIDER.SUB.DE
- Newsgroups: comp.sys.amiga.misc
- Subject: Re: HELP: df0: gone after A3640 installed
- Date: 4 Jan 96 21:26:45 GMT
- Message-ID: <985385.19960104212645W+045@GH_UUCP.INSIDER.SUB.DE>
- X-Gateway: ZCONNECT UH ame.osn.de [UUCPfZ V5.67 U003],
- EMFido V.3.0c
- X-FTN-TO: barothwe%cca.rockwell.com
-
- In article <MSGID_2=3A2490=2F1370.98_3dc74de8@fidonet.org>
- <2:2490/1370.98@fidonet> wrote:
- > You see, I can boot off df0: with the original Workbench floppy disk in
- > df0:, but when trying to boot of the hard drive, the system hangs until I
-
- Are you sure, you're booting off df0: ?
-
- > put a disk (any disk) in df0: (the df0: light is on "continous" as if the
- > system is trying to find a disk in the drive), then it finishes booting.
- > However, df0: is not recognized as a DOS disk... it's unusable.
-
- This sounds to me, as if you plugged the floppy cable twisted by 180 degree
- back onto the drive or motherboard when reassembling after the installation
- of the A3640.
-
- Ciao, Klaus.
- ---
- * Origin: Lonly Platform #88 (2:2437/901.88)
-
-